PS 15 rear master cylinder with plastic reservoir

Brembo no. 10.2426.00. Replaces original part with cast reservoir which is no longer available. Also replaces guzzi ref. 29667000. Please note that reservoir is slightly taller than the original, and you may need swap the operating arm from your old master cylinder if this is a different type.

 This part is available by special order, request a quote

 10438802 GU10438802 10 43 88 02
 1043 8802 1043.8802 10.43.88.02

Rear dished cast brake disc, black centre, 6 hole

Also fits Le Mans 1, Le Mans 2, Le Mans 3. A quality Italian sourced spare

Always fit new brake pads when replacing a brake disc - see BRA54724. Needs 6 x BRA98445

 This part is due back in stock soon, call 01484 841395 to reserve yours

18635760-z 18635760 GU18635760 18 63 57 60
 1863 5760 1863.5760 18.63.57.60

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Cagiva Elefant E750, Ducati 748

Pad pin kit for rear brake caliper. Consists of pad pin plus split pin

Also known as Guzzi ref. 978606

 This part is due back in stock soon, call 01484 841395 to reserve yours

 05659130 GU05659130 05 65 91 30
 0565 9130 0565.9130 05.65.91.30

Rebuild kit for Brembo rear caliper. This is a comprehensive overhaul kit containing dust seals, fluid seals, o ring, bleed nipple, and dust cap

Caliper seal kit

 This part is available by special order, request a quote

Speedo sensor on ABS equipped models, used for front and rear applications depending on model

Used as rear wheel ABS sensor on V85TT, front and rear sensor on V7 II ABS equipped models. There are several variants of these sensors, please compare to the sensor on your bike or contact us with a chassis number before ordering. Supercedes Guzzi ref. 6429875. 2 pin connector

 This part is due back in stock soon, call 01484 841395 to reserve yours

 859792 MG859792

Foot brake pedal supplied without rubber or peg

Rubber FRA81212 fits this pedal

 This part is available by special order, request a quote

2B005634

Front Brembo type brake disc, 6 mounting holes. Not drilled. High quality Italian made part

Also known as Guzzi ref. 14613350. Minimum thickness for these cast brake discs is 5.8mm. Always fit new brake pads when replacing a brake disc - see BRA54724. These discs may have oily manufacturing residues on the surface, this should be cleaned off using a cleaning alcohol or brake cleaner before fitting. New pads and discs should be bedded in using normal bedding in procedures. Needs 6 brake disc bolts BRA99499

 This part is due back in stock soon, call 01484 841395 to reserve yours

 28613345 GU28613345 28 61 33 45
 2861 3345 2861.3345 28.61.33.45

Also fits Benelli Sei

Flanged brake disc bolt for rear brake disc

6 bolts required per disc. Supercedes Guzzi ref. 894505

 This part is due back in stock soon, call 01484 841395 to reserve yours

2B002417

Also fits Aprilia RSV 4 (2011-2012), Aprilia Dorsoduro, Aprilia Caponord 1200 (2014-2016)

Caliper mounting shim, used to precisely centre caliper over brake disc

 This part is due back in stock soon, call 01484 841395 to reserve yours

 95100332 GU95100332 95 10 03 32
 9510 0332 9510.0332 95.10.03.32